Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem I / O mismatch detected, BL460c G6 Blade c7000

SOLVED
Go to solution
JuanCG
Super Advisor

Problem I / O mismatch detected, BL460c G6 Blade c7000

Hi all, I have a problem in a c7000 blade chassis HP.

The configuration of the interface modules is:

Bay1-HP VC-Enet Module 1/10Gb
Bay2 - HP VC-Enet Module 1/10Gb
Bay3 - Brocade 4/12 SAN Switch for HP c
Bay4 - Brocade 4/12 SAN Switch for HP c

OnBoard Version: Firmware Version: 3.70

When I connect a blade of this type:

Model: ProLiant BL460c G6
Manufacturer: HP
Part Number: 507780-B21
Mezz 1
Model: QLogic iSCSI adapter QMH4062
Manufacturer: QLogic
Part Number: 488074-B21
Product View: 0A


When the QLogic FC card is plugged in Position 1, I get this error:

 

1


I / O mismatch detected. Plesase see port mapping information

 

2

thank you very much

2 REPLIES
PGTRI
Honored Contributor
Solution

Re: Problem I / O mismatch detected, BL460c G6 Blade c7000

hi,

 

It looks that You are trying to connect a ethernet mezzanine card to a fibre channel VC module.

 

QMH4062 is a ethernet mezzanine card.

 

Thanks

 

regards,

How to Say Thank You? Just click the KUDOS!
Highlighted
JuanCG
Super Advisor

Re: Problem I / O mismatch detected, BL460c G6 Blade c7000

PGTRI Hello, thanks for answering, you're right, it was a mistake of mine, I did not watch the card.

thank you very much