BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with NW teaming on c7000 with bl460

Tstvetan
Occasional Visitor

Problem with NW teaming on c7000 with bl460

Hello,
i have c7000 with 4 bl460. When teaming is ON, the newrok drops. When I disable one of the team cards everything is Ok again, until reboot, then same situation. I try all teaming modes, same situation, with only one card, or one team user disabled everything is OK.
Any idea?
4 REPLIES
Lmm_1
Honored Contributor

Re: Problem with NW teaming on c7000 with bl460

Tstvetan, can you provide more details on this issue, whats the OS? whats the NCU version? Are you seeing Team Disconnected or only 1 team member? Is there any log on the windows events?
Johan Guldmyr
Honored Contributor

Re: Problem with NW teaming on c7000 with bl460

Hi, what do you mean the network drops?
Do you have any spanning tree or similar activated on the switch ports?
Tstvetan
Occasional Visitor

Re: Problem with NW teaming on c7000 with bl460

Hi, 4 blades running on 2K3 x64 R2, Firmware is 2.51 from May 28 2009. There is no any error in win event or in OA. Network is showing "conncted", and looks like everything is OK. but ping stops, alcc connections terminate, util disable/enable one of the team users, then everything is OK, util reboot.
The Brit
Honored Contributor

Re: Problem with NW teaming on c7000 with bl460

Hi,
The other information we REALLY need is

1. What Interconnect modules are you using, and which IC bays are they installed in?

2. What Mezz cards (if any) do you have installed on your blades.

3. How have you set up the NIC Teaming on your blades, i.e. which NIC ports make up the teams?

Dave.