HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant BL20p G3 server Blade Front Panel LEDs

 
SOLVED
Go to solution
Seamus10
Occasional Advisor

Proliant BL20p G3 server Blade Front Panel LEDs

On one of our blades an amber light on the front panel. The light indicates the Health which is in "degrading status"
I have tried to troubleshoot this issue, with no luck.
We have a cluster, consisting of 5 blades and 14 VM's
I cannot see anything from the Virtual Client that would indicate any issues
Is there any way of troubleshooting this issue before it becomes critical.
3 REPLIES
Thomas Bauer_3
Frequent Advisor

Re: Proliant BL20p G3 server Blade Front Panel LEDs

Hi Seamus10,

do you use SIM?
Is there any Log in IML?

Hth
Thomas
Pshedges
Trusted Contributor
Solution

Re: Proliant BL20p G3 server Blade Front Panel LEDs

Assuming you have the Insught agents installed you could try http://hostname:2301 or https://hostname:2381 which should give you the systems management homepage and will show any hardware issues.

If you log onto the server itself to access the systems management homepage you can just replace the hostname with 'localhost'
Seamus10
Occasional Advisor

Re: Proliant BL20p G3 server Blade Front Panel LEDs

thanks Pshedges, I install HP Insight Agents and it was the Memory