BladeSystem - General
1748219 Members
4785 Online
108759 Solutions
New Discussion юеВ

Re: Proliant BL460c doesn't power up

 
Rude
Occasional Contributor

Re: Proliant BL460c doesn't power up

I was about to place a msg about the same problem that we are having with some of our blades (DL460c G1 with recent firmware versions) when I saw this post. A bit disappointing to find out that the solution is to replace parts. Stubborn as I can be at times I wanted to explore possible alternatives and I eventually solved the problem by resetting iLO.

R
LuisDaCR
New Member

Re: Proliant BL460c doesn't power up

There is a dependency on the iLo and the OA, iLo2 firmware must be updated to at least 1.50 before updating OA.
But in this case I'd recommend to clear the NVRAM (removing the battery).
JKytsi
Honored Contributor

Re: Proliant BL460c doesn't power up

forgot to close this last year
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi