HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

QMH2562 for BL680C

 
Jalal Rohani
Occasional Visitor

QMH2562 for BL680C

Hi,

I have used HP ConfigureAIDER to config a blade system. after making LOM it has listed QLogic QMH2562 8Gb FC HBA for BL680C, but I am not sure if they are compatible or not. How can I check it?
3 REPLIES
The Brit
Honored Contributor

Re: QMH2562 for BL680C

Hi Jalal,

Check the quickspecs. For the QLogic QMH2562 8Gb FC HBA the quickspecs are at;

http://h18000.www1.hp.com/products/quickspecs/13192_div/13192_div.pdf

The compatibility matrix on page 3 does not include bl680c, only bl685c. (but I would check with HP)

Dave
Jalal Rohani
Occasional Visitor

Re: QMH2562 for BL680C

Thanks Dave,

I have seen that page on HP Product Bulletin (but it dose not have notification about G5 Series) and it seems BL680C is not on the list.

It is strange why QMH2562 is listed at HP eConfigure Solutions for BL680C.

Cheers,
The Brit
Honored Contributor

Re: QMH2562 for BL680C

Yes, that is strange, however the 8Gb HBA's are still (relatively) new, so the quickspec may be out of date.

I would still check with HP. It maybe that it is OK if the firmware is above a certain level.

Dave.