BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Qlogic 4Gb FC HBA and LSILogic SCSI contrller conflict?

pkolomanski
Occasional Advisor

Qlogic 4Gb FC HBA and LSILogic SCSI contrller conflict?

Hello all.

I've came into strange problem in my blade system.
I have one specific blade (460) among others with Qlogic FC mezzaine card installed and extension blade as a neighbour with LSI Logic SCSI controller installed (for autoloader). When extension blade is installed, my Qlogic HBA dissapear from hardware manager and SAN isn't reachable. But when I remove extension blade, HBA is OK.
What's wrong? What should I do to resolve this problem? I tried enable/disable BIOS in HBA but no go...
Any help appreciated :) Thanks in advance.
2 REPLIES
pkolomanski
Occasional Advisor

Re: Qlogic 4Gb FC HBA and LSILogic SCSI contrller conflict?

It turned out, that Qlogic HBA was damaged. After replace everything is OK.
pkolomanski
Occasional Advisor

Re: Qlogic 4Gb FC HBA and LSILogic SCSI contrller conflict?

Damaged Qlogic HBA.