BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Question on memory speed

 
Trojan36
Frequent Advisor

Question on memory speed

Is it true that the memory speed will decrease if all the memory slots are filled on a Proliant blade server? Also, can the memory be configured with different speed memories? Thx in advance.
3 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: Question on memory speed

hi,

Is it true that the memory speed will decrease if all the memory slots are filled on

= yes

hi, check this docu from HP :

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01852590/c01852590.pdf

go to "Memory technologies" section

and also check this link from HP

http://h18004.www1.hp.com/products/servers/options/memory-description.html

and also you could use this tool :

DDR3 Memory Configuration Tool - but sometimes the configuration is not so trust full.

http://h18000.www1.hp.com/products/servers/options/tool/hp_memtool.html

mikap
Trojan36
Frequent Advisor

Re: Question on memory speed

Michal,

Would know if this is the same with the Itanium memory architect? Thx
Michal Kapalka (mikap)
Honored Contributor

Re: Question on memory speed

hi,

no, because the itanium is another architecture, but there is also some rules how to add the memory, , for example in superdome there is also dependence to the performance where the cell board is located in the cabinet that is joined with another cell.

mikap