HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID Configuration Problem

 
SOLVED
Go to solution
UVA
Regular Advisor

RAID Configuration Problem

Hi Gurus,

Greetings of the day!

on one of my Bl860c server the H/W RAID was configured differently,that is in the IR volume group the SAS HD2 configured as primary disk and SAS HD1 configured as secondary .

is this configuation will impact on my system performance. How to revert the RAID conf without losing of DATA
on this.

Thanks in advance
3 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: RAID Configuration Problem

Don't worry. 1 disk must be the primary, the other the secondary - no matter which one it is.


Please close your duplicated thread.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
UVA
Regular Advisor

Re: RAID Configuration Problem

Hi,


Thanks Torzon.

UVA
Regular Advisor

Re: RAID Configuration Problem




I found the solution about my query thaks for HP and experts