BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Read Drive Position from ADU Report

patienttrac
Visitor

Read Drive Position from ADU Report

I made stupid mistake pulling drives from a production server and not marking drive locations.

have replaced drives and booted server getting error 1785. Have run ADU report but have no ideal how to read it.

i have (2) Drives Mirror and (4) Drives Raid 5

how and where do i see original drive location in the ADU Report?

I have attached report

Or how to get raid drives to where i can get MS SQL DB Files from RAID

 

1 REPLY
Pallavi_V
Occasional Advisor

Re: Read Drive Position from ADU Report

Hello,

 

If you have removed more than 1 HDD at a time from the logical drive, the raid and the logical drive would be broken. Hence, there are chances of data lose and you may have to re-create the logical drive.

Even if you have replaced the Hard drives in different slot, the result would be same.

 

You can open the ADU.zip and then open the txt file and read the below details :

 

Consolidated Error Report:
   Controller: Smart Array 6i in Embedded Slot
      Message: The array controller has an unsupported configuration. You may reconfigure the controller, but the existing configuration and data will be overwritten and potentially lost.

 

Smart Array 6i in Embedded Slot : Identify Controller
   Configured Logical Drives            0 (0x00)
   Configuration Signature              0xa008aae0
   RAM Firmware Revision                2.58

 

This shows the Logical Drives : 0, which looks to be the logical drive has been broken.

 

You may have yo re-create the logical drive and re-store the data from the backup, if you have already taken.

 

If you feel this was helpful, please click the KUDOS! thumb below!

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details