HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Reboot BL460c after update iLO, windows safe mode

 
InventoRs
Occasional Visitor

Reboot BL460c after update iLO, windows safe mode

I have a server BL460C, which is installed in the C7000, after updating the iLO in the BL460c to the version taken at this location when you log in safe mode on 2009 r2 all versions simply overloaded, while in the logs no any error messages.
Reverting to earlier versions of iLO set of problems are not delivered.
Replacement and upgrade the operating system with a complete cleaning system, too, has given nothing.
Help to solve this problem. Thank you.
5 REPLIES
JKytsi
Honored Contributor

Re: Reboot BL460c after update iLO, windows safe mode

Update latest HP ProLiant iLO 2 Management Controller Driver for Windows Server 2008 x64 Editions
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
JKytsi
Honored Contributor

Re: Reboot BL460c after update iLO, windows safe mode

As a new user to forum, remember to assign points to answers people provide to help You. Close the thread when You have found solution.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
InventoRs
Occasional Visitor

Re: Reboot BL460c after update iLO, windows safe mode

downloaded and installed to link

HP ProLiant Integrated Lights-Out Management Interface Driver for Windows Server 2003/2008 x64 Editions

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=1842750&prodNameId=3288156&swEnvOID=4064&swLang=8&mode=2&taskId=135&swItem=MTX-5213766781e04297a1b5e259af
restart the server in safe mode, a window appears asking you to click ctrl + alt + del then when moving the mouse pointer sticks for 2 seconds and the server reboots
JKytsi
Honored Contributor

Re: Reboot BL460c after update iLO, windows safe mode

How about if You boot the OS normally ? What't this safe mode thing leading ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
WFHC-WI
Honored Contributor

Re: Reboot BL460c after update iLO, windows safe mode

Hi inventors,

Your link points to the Interface Management driver. You also need the Management Controller driver here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=1842750&prodNameId=3288156&swEnvOID=4024&swLang=8&mode=2&taskId=135&swItem=MTX-3d0e95f1468941fc8de6ccb490

I recommend connecting to the front of the blade directly using an SUV (serial, USB, video) cable. This will bypass the iLO connection. I have not heard any evidence to suggest it, but perhaps the iLO drivers are not loaded when Windows safe mode starts....

good luck