BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Renaming a VC Profile

SOLVED
Go to solution
The Brit
Honored Contributor

Renaming a VC Profile

I would like to rename my profiles so that they better reflect their use. Is there a procedure for doing this?? I dont want to change any of the contents (WWID's etc), only the name.

Dave.
2 REPLIES
Ken Henault
Honored Contributor
Solution

Re: Renaming a VC Profile

I don't have one handy to check how it's done through the GUI, mine are managed by VCEM. You can do it through the command line with the following command:

set profile Name=

(I tested VCEM, and you can rename profiles there through the GUI as well.)
Ken Henault
Infrastructure Architect
HP
The Brit
Honored Contributor

Re: Renaming a VC Profile

Thanks Ken,
I did it from the GUI and that appeared to work fine.

Dave.