HPE Community
BladeSystem - General
1753879 Members
7602 Online
108809 Solutions
New Discussion

Re: Replicate BIOS settings

 
James Schroer
Occasional Contributor

‎03-17-2010 10:52 AM

‎03-17-2010 10:52 AM

Replicate BIOS settings

I have a lot of BL460c G1 servers that I need to make some BIOS changes and need everything consistent across the board. Is there anything that I can use either with the OA or OA CLI, or anything else that I can replicate the setting I want to many of these boxes?
0 Kudos
Reply
1 REPLY 1
WFHC-WI
Honored Contributor

‎03-17-2010 12:16 PM

‎03-17-2010 12:16 PM

Re: Replicate BIOS settings

hi James,

The OA CLI cannot change BIOS settings (except for boot order). However you can change iLO settings via OA CLI with the HPONCFG utility.

For BIOS changes I recommend using the SmartStart Scripting Toolkit... specifically the CONREP utility.

good luck
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.