BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Reported abnormally low power requirement

Aaron.S
Frequent Advisor

Reported abnormally low power requirement

One of my cclass enclosures in particular has started reporting quite a few messages about the enclosure has detected that the blade reported an abnormally low power requirement.

This is further befuddling as there is no records in HP or the onboard administrator about any such messages.

(as a side note, my blades alternate from 'reachable' to 'unreachable' every three days or so)
4 REPLIES
Pawan Rawat_1
Frequent Advisor

Re: Reported abnormally low power requirement

Hi
I am also facing same problem

Thanks
Pawan
h0tspur
Occasional Visitor

Re: Reported abnormally low power requirement

Same here. Any news on this?
Adrian Clint
Honored Contributor

Re: Reported abnormally low power requirement

You probably need to update the iLO to 1.78 and the Power Control firmware to 3.4B.
See the firmware section of the drivers/firmware downloads for you blade.
h0tspur
Occasional Visitor

Re: Reported abnormally low power requirement

Ok, thanks. I just did that on another blade server. I will test this