SB40C and Sb920C FW upgrade status Skipped

[Siegfried76]

Hi,

I've tried to upgrade 2xSb40c and 1xSb920c with firmware 2.2

When i'll try to update them, the status was "SKIPPED"?

HAve you got a answer? I've shutted down all of my blades before upgrade.

Regards,

Siegfried

[Raghuarch]

you get skipped if you have same version FW on the Storage Blades.

Check the Current Firmware using the Command
"update show", If they doesn't have the new Firmware you can update it otherwise it will be skipped.

What is the Version of the OA?

[Siegfried76]

Hi,

Thanks for your answer.
Oa is 2.31.

Here is tuhe output of the update show command:

TRAY | BladeSystem c7000 Onboard Administrator Tray | - | 1.6 | 1.6
LCD | BladeSystem c7000 Insight Display | - | 2.2.2 | 2.2.2
BLADE | HP StorageWorks SB40c | 2 | 1.20 | 2.20
BLADE | HP StorageWorks SB40c | 4 | 1.20 | 2.20
BLADE | HP StorageWorks SB920c | 6 | 1.20 | 2.20
FAN | BladeSystem c-Class fan | 1 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 2 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 3 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 4 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 5 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 6 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 7 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 8 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 9 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 10 | 2.7.4 | 2.7.4

Regards

[Raghuarch · Accepted solution]

Try the below command: It should work fine.
"Update device force blade "

[Siegfried76]

Raghuarch, Thank you and sorry for the answer, i've lost my credentials ;-)