HPE Community
BladeSystem - General
1752808 Members
6042 Online
108789 Solutions
New Discussion

Second Processor Installation

 
Sridhar R
Regular Advisor

‎12-04-2007 01:01 AM

‎12-04-2007 01:01 AM

Second Processor Installation

Hi,

I am in process of installing a second processor in BL60p Server. The OS in this particular Server is HP-UX which is already installed.

Even after fixing the second processor, i could able to find there was only one processor with the output of "machinfo" command.

Is there anything else that i should do in addition to this.

Any help appreciated!!




Thanks in Advance,
Sridhar R
0 Kudos
Reply
1 REPLY 1
Mridul Shrivastava
Honored Contributor

‎12-04-2007 03:13 AM

‎12-04-2007 03:13 AM

Re: Second Processor Installation

I am not very sure about the blade servers but normally on RISC/Integrity servers if this is a new one and was not configured before then we would have to configure it at EFI Shell first only then OS will be able to see it.
Time has a wonderful way of weeding out the trivial
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.