HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Server is not in a managed enclosure

 
Dennis_L
Advisor

Server is not in a managed enclosure

We have a bl20p G2 server wich is not shown up in the enclosure.
When i try to run the HP ProLiant BL Rack Upgrade Utility i will get the following error: "Unable to enumerate rack components"
When i try the option Rack View in iLO i will get the following error: "The server is not in a managed enclosure"

Other servers in the same enclosre work just fine.

iLO version: 1.91
Enclosure FW: 2.40
5 REPLIES
Raghuarch
Honored Contributor

Re: Server is not in a managed enclosure

Hi Denis,

The rack firmware upgrade has some prerequisites:

For Linux Operating Systems:
- HP Server Management Drivers and Agents
- HP Lights-Out Drivers and Agents

For Windows Operating Systems:
- HP ProLiant Rack Infrastructure Interface Service
- HP ProLiant Integrated Lights-Out Management Interface Driver

Check that these are current, as the enclosure manager needs all the links in the chain running to receive the firmware update.

Hope this helps You.

Regards,
Raghuarch

Dennis_L
Advisor

Re: Server is not in a managed enclosure

Both services are up to date
Raghuarch
Honored Contributor

Re: Server is not in a managed enclosure

Hi Dennis,

Please try to reinstall Enclosure FW: 2.40.

If it doesn't work you may need to downgrade the Enclosure Firmware to a lower version.

Regards,
Raghuarch
Dennis_L
Advisor

Re: Server is not in a managed enclosure

reinstall worked!

thaks
Dennis_L
Advisor

Re: Server is not in a managed enclosure

reinstall the firmware