BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Some VMM 2008 R2 & BL460c questions

ecemibm
Occasional Contributor

Some VMM 2008 R2 & BL460c questions

Hi,

I have implemented my virtual environment over a C7000 bladesystem and BL460c servers... I have connected an external storage via ethernet used as a iSCSI SAN Storage.

I'm trying to set up a SAN network but I'm finding some problems about the VDS hardware provider and another issues about network optimizations...

All these things are related with the hardware... the first one with the storage vendor but the other issue is related with the NICs... I would like to know if the blades support this feature and how should I configure them...

The servers have NC326m Dual Port 1Gb NICs

Regards.
1 REPLY
Ali
HPE Pro

Re: Some VMM 2008 R2 & BL460c questions

Hi there,

might be helpful

http://h30499.www3.hp.com/t5/HP-BladeSystem-Virtual-Connect/C7000-and-Network-Virtual-connects/m-p/272

http://communities.vmware.com/message/1562107

thanks,
Aftab
I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base – Just a Click Away!
See Self Help Post for more details