BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Stacking Flex-10 modules between enclosures

chaney56
Advisor

Stacking Flex-10 modules between enclosures

We have two c7000 blade enclosures, each with Flex-10 modules in interconnect bays 1 and 2 and 5 and 6. I have been unable to find documentation on stacking Flex-10 modules between enclosures when there are 4 modules in each enclosure. If someone could point me to a diagram for cabling or a document covering this, I would appreciate it.

 

Thanks

1 REPLY
Suman_1978
HPE Pro

Re: Stacking Flex-10 modules between enclosures

Hi,

 

Please refer to the following:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01724621

Virtual Connect Multi-Enclosure Stacking Reference Guide
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02102153/c02102153.pdf

Refer to "Recommended stacking connections" from HP Virtual Connect for c-Class BladeSystem Setup and Installation Guide
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01732252/c01732252.pdf