HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

Standby Onboard Administrator

Occasional Advisor

Standby Onboard Administrator


I have just upgrade both of my OA to version 3.0.

After the upgrade i was unable to login on my Active Onboard Administrator at got this error:
The action did not complete successfully.

I then did connect to my standby Onboard Administrator and did make that the new Active Onboard Administrator.

If i then go and check fx TCP/IP Settings or the System Log for the Standby Onboard Administrator i get the following error:
An error ocurred while communicating with the other Onboard Administrator.

I have done a reset on both of the Onboard Administrators, but that dident help.

Can someone help me in a direction on what to do?
Benoy Daniel
Trusted Contributor

Re: Standby Onboard Administrator

pull out the active OA module and see its getting switched over to the other OA module
Jan Soska
Honored Contributor

Re: Standby Onboard Administrator

Did you try connect to OA from another computer / browser?
I noticed some browser cache problem after OA firmware updates.

Occasional Advisor

Re: Standby Onboard Administrator

I have fixed it now.

I did downgrade again to 2.60 and then it did work.
Occasional Advisor

Re: Standby Onboard Administrator