BladeSystem - General
1748011 Members
4568 Online
108757 Solutions
New Discussion юеВ

Re: Stop Error on ML 350 G5

 
NiekStrijker
New Member

Stop Error on ML 350 G5

Our server (ml350 g5 win2003 64-bit) had a unexpected restart. Due to a bluescreen. The only log in the event viewer is a eventid 6008. The integrated management log has the folowing log: Blue Screen Trap (BugCheck, STOP: 0x00000077 (0xC000000E, 0xC000000E, 0x00000000, 0x00729000))
Is this a hardware or software error?
3 REPLIES 3
Johan Guldmyr
Honored Contributor

Re: Stop Error on ML 350 G5

Hi, googled on this.

First hit: http://support.microsoft.com/kb/315266

"Stop 0x00000077" or "KERNEL_STACK_INPAGE_ERROR"

This indicates that the requested page of kernel data from the paging file could not
be read into memory.

Nice that searching on the 4th of the addresses (0x00729000) in () shows to this page.

Anyway, quite likely that this is a hardware issue. Try extensive memory and hdd testing for a starter. Also possible that upgrading firmware on controllers/system board or OS/patches can get rid of this.
Seems like this could be about anything (at least as far as google goes)..

NiekStrijker
New Member

Re: Stop Error on ML 350 G5

Thank you Johan, i will try this later today.
Johan Guldmyr
Honored Contributor

Re: Stop Error on ML 350 G5

Good luck, please let us know how things goes :)