System info/association not showing up correctly on HP SIM

[Franck_21]

Good morning,

I have a private collection of servers set. However the association between a given server and its enclosure is lost after a while (until I do a fresh discovery run). The same applies for the association between ilo interfaces and the parent servers.

Thanks

[Terri Harris]

What is the SIM version? What is the SIM BladeSystem Integrated Manager version?
What is the ilO firmware? And the OA fw?

I'm assuming these are c-class blade enclosures. Also assuming you have set static IP addresses for both the OA modules & the iLO.

[Franck_21]

Systems Insight Manager 5.2 with SP2 - Windows

HP BladeSystem Integrated Manager 3.4

HP ProLiant iLO Advanced and Enhanced System Management Controller Driver for Windows Server 2003 5.42.0.0

What do you mean by OA?

Actually it is a p-class enclosure and yes everythning is set as static

[Dennis Handly]

>What do you mean by OA?

Onboard Administrator

[Franck_21]

Do not think we have OA. It seems to appy to c-class enclosures (we have a p-class one)

[Jeff Allen_5]

Is SNMP on the blade servers set to allow access from 127.0.0.1 (or localhost)?

[Franck_21]

SNMP agents are configured to accept connections from localhost