BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

System info/association not showing up correctly on HP SIM

Franck_21
Advisor

System info/association not showing up correctly on HP SIM

Good morning,

I have a private collection of servers set. However the association between a given server and its enclosure is lost after a while (until I do a fresh discovery run). The same applies for the association between ilo interfaces and the parent servers.

Thanks
6 REPLIES
Terri Harris
Honored Contributor

Re: System info/association not showing up correctly on HP SIM

What is the SIM version? What is the SIM BladeSystem Integrated Manager version?
What is the ilO firmware? And the OA fw?

I'm assuming these are c-class blade enclosures. Also assuming you have set static IP addresses for both the OA modules & the iLO.
Franck_21
Advisor

Re: System info/association not showing up correctly on HP SIM

Systems Insight Manager 5.2 with SP2 - Windows

HP BladeSystem Integrated Manager 3.4

HP ProLiant iLO Advanced and Enhanced System Management Controller Driver for Windows Server 2003 5.42.0.0

What do you mean by OA?

Actually it is a p-class enclosure and yes everythning is set as static
Dennis Handly
Acclaimed Contributor

Re: System info/association not showing up correctly on HP SIM

>What do you mean by OA?

Onboard Administrator
Franck_21
Advisor

Re: System info/association not showing up correctly on HP SIM

Do not think we have OA. It seems to appy to c-class enclosures (we have a p-class one)
Jeff Allen_5
Valued Contributor

Re: System info/association not showing up correctly on HP SIM

Is SNMP on the blade servers set to allow access from 127.0.0.1 (or localhost)?
Franck_21
Advisor

Re: System info/association not showing up correctly on HP SIM

SNMP agents are configured to accept connections from localhost