HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Teaming or bonding on the virtual connect Flex10 Inet module connected with c7000

 
Syedfurquan
Trusted Contributor

Teaming or bonding on the virtual connect Flex10 Inet module connected with c7000

Hello Expert,

 

I have a c7000 blade enclosure with 4 bl860c running with HP-UX 11v3. The blade enclosure is connected with 2 "HPVC Flex 10 Enet Module" and both Flex 10 card is having 1 fc port connectivity and one port is free.

 

Now my Blade administrator is planning to do teaming or bonding on teh virtual connect.

 

My concerned is after doing this change in configuration what will be the impact on HP-UX 11iV3 OS and do I need to reconfigure the IP. How does the O/P of lanscan will be looking.

Currently lanscan o/p as:

 

lanscan

Hardware Station        Crd Hdw   Net-Interface  NM  MAC       HP-DLPI DLPI

Path     Address        In# State NamePPA        ID  Type      Support Mjr#

0/2/2/0  0x78E7D17310C2 2   UP    lan2 snap2     1   ETHER     Yes     119

0/1/1/0  0x78E7D17310C0 0   UP    lan0 snap0     2   ETHER     Yes     119

0/1/1/1  0x78E7D17310C1 1   UP    lan1 snap1     3   ETHER     Yes     119

0/2/2/1  0x78E7D17310C3 3   UP    lan3 snap3     4   ETHER     Yes     119

LinkAgg0 0x000000000000 900 DOWN  lan900 snap900 6   ETHER     Yes     119

LinkAgg1 0x000000000000 901 DOWN  lan901 snap901 7   ETHER     Yes     119

LinkAgg2 0x000000000000 902 DOWN  lan902 snap902 8   ETHER     Yes     119

LinkAgg3 0x000000000000 903 DOWN  lan903 snap903 9   ETHER     Yes     119

LinkAgg4 0x000000000000 904 DOWN  lan904 snap904 10  ETHER     Yes     119

 

bnhrac01@root/#netstat -nr

Routing tables

Destination           Gateway            Flags Refs Interface  Pmtu

127.0.0.1             127.0.0.1          UH    0    lo0       32808

10.0.1.15             10.0.1.15          UH    0    lan0      32808

10.0.1.17             10.0.1.17          UH    0    lan0:801  32808

10.0.253.17           10.0.253.17        UH    0    lan3      32808

10.0.253.16           10.0.253.17        U     2    lan3       1500

10.0.1.0              10.0.1.15          U     3    lan0       1500

10.0.1.0              10.0.1.17          U     3    lan0:801   1500

127.0.0.0             127.0.0.1          U     0    lo0       32808

default               10.0.1.1           UG    0    lan0       1500

 

Please help what will be the situation after doing the configurations change on Virtual connect on hp-ux OS as it is production enviornment.

 

Regards

Regards,
Syed