BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Transmit Load Balancing with Fault Tolerance (10003)

 
Bruno Z.
Occasional Visitor

Transmit Load Balancing with Fault Tolerance (10003)

I got a may ProLiant BL20p G3 Servers.
Two of the network interfaces are configured as a team. (Transmit Load Balancing with Fault Tolerance (TLB)).
The third network interface is not used.
In the System management homepage the following errors occours: "Transmit Load Balancing with Fault Tolerance (10003)"

I know, in this case i got no fault tolerance, can i disalbe the error message?
Regards
Bruno