HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrade the VC 1/10 modules to VC Flex 10.

 
jd7000
Frequent Advisor

Upgrade the VC 1/10 modules to VC Flex 10.

Hi,

I need to upgrade the VC 1/10 modules to VC Flex 10.

The enclosure is a C7000 with a VC 1/10 in Bay 1, 2 and Bay 5, 6.

Bay 3 and 4 have FC modules in.

The blades are BL460c's.

Is this quite straight forward?

Thanks,
2 REPLIES
The Brit
Honored Contributor

Re: Upgrade the VC 1/10 modules to VC Flex 10.

John,

An earlier thread gave a procedure which, in retrospect proved to have failed. Check this thread for discussion.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1435511

Dave.
The Brit
Honored Contributor

Re: Upgrade the VC 1/10 modules to VC Flex 10.

John,
The scripting is relatively straight forward, refer to the VC CLI user guide.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01881078/c01881078.pdf

or, complain to HP that the documented procedure doesnt work, and you might be able to get them to generate the scripts for you based on a saved configuration file.

Note the most recent version of the upgrade procedure (Jun 2010) is still incorrect.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01732252/c01732252.pdf

HTH

Sorry it couldnt be more helpful.

Dave.