HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Uplink Failure Detection Configuration

 

Uplink Failure Detection Configuration

I've in my design 4 HP BLc GbE2c LY 2/3 Switches, on VC Cards 1/2 I have only one upload link per VC card and I've enabled the UFD and the failover is working properly, for VC cards 3/4 I've 2 upload links per VC cards in two different VLANs, when enabled and configuring the UFD I’ve got an error and configurations can’t be saved, after checking the logs I found that I can’t add more than upload link to enable the UFD.

I have to have access links, and I don’t want to have a trunk link.

Any idea how this should works?