HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Urgent - BL460c blade and MSA1510i SAN disconnect

 
Brett Geibel
Occasional Visitor

Urgent - BL460c blade and MSA1510i SAN disconnect

I currently have BL460c connected to am MSA1510i SAN. The configuration looks ok and seems to work fine until it is put under a load. At that point the BL460c can't see it and the server locks. The only way to bring it back is to reboot everything and wait for the next time. It looks like all firmware is up to date. Any suggestions?
3 REPLIES
HEM_2
Honored Contributor

Re: Urgent - BL460c blade and MSA1510i SAN disconnect

Brett Geibel
Occasional Visitor

Re: Urgent - BL460c blade and MSA1510i SAN disconnect

Thank you for the reply. I was able to check my version from the CLI, and the Auto Rev did indicate 0x030000.

Looks like I'm clear.

I really appeciate your suggestion.
Allan D'Souza
Regular Advisor

Re: Urgent - BL460c blade and MSA1510i SAN disconnect

Are you running Windows or VMWare?