HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

VC Ethernet cabling

 
Alex Samad
Frequent Advisor

VC Ethernet cabling

Hi

I have rack with 4 x C7000's each has 2 VC ETH + 2 VC FC. At the top of the rack I have 2900 (it has 4 10G ports on the back).

Is there any way for me to daisy chain the 10G ports on the VC ethernet up to the 2900 ?
3 REPLIES
Ken Henault
Honored Contributor

Re: VC Ethernet cabling

Enclosure stacking is available as a beta feature in VC 1.34 firmware. It's likely to be released as a fully supported feature later this year.
Ken Henault
Infrastructure Architect
HP
Alex Samad
Frequent Advisor

Re: VC Ethernet cabling

I was told to have a look at 2.1
Ken Henault
Honored Contributor

Re: VC Ethernet cabling

You only need 2.1 if you're using flex-10 NICs. If not, you're better off with 1.34.
Ken Henault
Infrastructure Architect
HP