BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

VC + Procurve 6120 + NC532m problem?

Harri Ahokas
Occasional Contributor

VC + Procurve 6120 + NC532m problem?

Hi,

I have C7000 with two VC-10 (IC slot 1&2) and two Procurve 6120 switches (IC slot 3&4).
I try to connect BL460 with LOM + NC532M (Mezz slot1), but somehow VC configures also NC532m NICs as an Flex-Nic even those are conected to 6120 and OS (win2008 R2) sees 16 NICs. All NC532 ports are in cable disconnected-state.

Any idea how to force NC532m NIC act as an 'normal' two-port NIC so that I also can configure iSCSI settings to it. Now iSCSI tab is empty because NIC act as it is connected to VC even it doesn't?

Thank's
Harri
1 REPLY
HEM_2
Honored Contributor

Re: VC + Procurve 6120 + NC532m problem?

Harri:

Unfortunately this configuration won't work. I would recommend opening a support case for more details and recommendation on an alternate configuration that will work.