cancel
Showing results for 
Search instead for 
Did you mean: 

VCEM

farhat_1
Advisor

VCEM

Dear Users

We are using Virtual connect enterprise manager (VCEM) for managing the virtual connect.

VCEM has two domain.

Recently we had a power shut down activity and had to power down both the enclosure.

After powering the enclosure when we logged into the VCEM page it showed Configuration mismatch. as per the VCEM user guide they have asek to resynchronise the VC domain and to resynchronise the VC doamin it has to be in VC maintenance mode, but this maintenence mode is grayed out, kindly let us know how cn we enable the VC maintenence tab.
7 REPLIES
JKytsi
Honored Contributor

Re: VCEM

Discover the OA and Virtual Connect IPs again in SIM.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
farhat_1
Advisor

Re: VCEM

From the SIM we need click configure and repair and manually select the discovery of the active OA and the primary virtual connect of the enclosure. Is this right
JKytsi
Honored Contributor

Re: VCEM

Yes, VCEM talks to primary OA/VC module and during failover it needs to re-discover
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
farhat_1
Advisor

Re: VCEM

will the rediscovery disrupt any of the VCEM functionality.
JKytsi
Honored Contributor

Re: VCEM

No.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
farhat_1
Advisor

Re: VCEM

thanks for the prompt reply as the system are in production once done I will reply back.
JKytsi
Honored Contributor

Re: VCEM

Please do so. And do not forget to assign point to answers (if those helped You).
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi