HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

VCEM

 
SOLVED
Go to solution
Nelson Lee_1
Occasional Advisor

VCEM

Hi

I have HP SIM 5.3/VCEM 1.4. I am trying to use VCEM to manage my HP C7000 chassis flex 10 modules and during discovery, the chassis domain is not appearing under "All Chassis Virtual Domain."

I configured the Flex modules for local IP and a domain ip.

Any suggestions or step that I may have missed?

9 REPLIES
JKytsi
Honored Contributor

Re: VCEM

Is there a VC domain set up in the enclosure ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Nelson Lee_1
Occasional Advisor

Re: VCEM

Yes,

I use the folowing cli commands

set domain name = chassis_vc_domain
set domain ipaddress=192.168.1.10 subnetmask=255.255.255.0 gateway=192.168.1.1
set domainip =enabled.

When I run a discovery, only the chassis information shows up under "All C Class Chassis", nothing else.

Thanks
JKytsi
Honored Contributor

Re: VCEM

Those commands do not create a virtual connect domain.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Nelson Lee_1
Occasional Advisor

Re: VCEM

Hi Jarkko K

What do you mean creat a vc domain?
JKytsi
Honored Contributor

Re: VCEM

There must be a virtual connect domain created before VCEM can be manage it (OR SIM to discover it).

1. LOG IN TO VC IP WITH BROWSER
2. FOLLOW THE WIZARD
3. DISCOVER VC IP IN SIM
4. MANAGE WITH VCEM

Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Nelson Lee_1
Occasional Advisor

Re: VCEM

Let me tried this an hope I get better results.

Thank You very much.
JKytsi
Honored Contributor
Solution

Re: VCEM

No Problem, You also need to licence the enclosure to VCEM.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Nelson Lee_1
Occasional Advisor

Re: VCEM

Hello,

Thank you for your help. I tried your recommendation and it did not work. After hours with HP support, they told me it will be a miracle to solve my problem and it would have to be documented and escalated another level.

I think the support guy wanted to go home because he kept giving me the "I don't know".

I went ahead and blew away all configuration on the chassis and only focus on configuring the OA and Flex. This actually worked!!!.



Nelson Lee_1
Occasional Advisor

Re: VCEM

Make sure blade profiles are not created before trying to import into VCEM.