HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN settings on HP BLc GbE2c LY 2/3 Switch

 
damiri
Regular Advisor

VLAN settings on HP BLc GbE2c LY 2/3 Switch

Hello,

I have 438030-B21 HP BLc GbE2c LY 2/3 Switch where I am trying to setup simple port based VLAN (tagged and untagged) but it is unclear per documentation. Per documentation default VLAN per port is actually untagged port VLAN and rest of setup is for tagged VLANs. However, if we put port in few VLANs, it is changing default VLAN. Anybody with experience with this switch ?

Damir
3 REPLIES
Lmm_1
Honored Contributor

Re: VLAN settings on HP BLc GbE2c LY 2/3 Switch

By default, a port can belong to one VLAN only, therefore the PVID or default vlan for the port will change when you move it to another VLAN, to make the port member of more than one vlan, you need to enable tagging on port basis first:

cfg/port x/tag/e

After that, you add the port to multiple vlans and keep the same PVID.

.Lmm
damiri
Regular Advisor

Re: VLAN settings on HP BLc GbE2c LY 2/3 Switch

Yes, this is what I did but as soon as I add port to some other VLAN, then default VLAN in switch-port configuration changes to this. Is this expected behavior ?
Lmm_1
Honored Contributor

Re: VLAN settings on HP BLc GbE2c LY 2/3 Switch

It happens if the port is not tagged, check the attached file, I just did it and works fine, PVID still 1.