BladeSystem - General
1748113 Members
3495 Online
108758 Solutions
New Discussion юеВ

Re: Virtual Connect FlexFabric 10Gb/24-Port Module

 
TimInColdLake
Occasional Contributor

Virtual Connect FlexFabric 10Gb/24-Port Module

Hi
We bave a new C7000 populated with BLc460 G6 blades and we are looking at the virtual connect convergence solutions. The only thing I cannot figure out is the connection from the ethernet port on the flexconnet module to a 10Gb SFP on a cisco switch. We want 10Gb so I am looking at the 455883-B21 ethernet optical sfp Looking at the picture of it, it shows a SFP with a wire coming out. What is on the other end? LC connections? I have never used these before so I am not sure and I hope I am making sense. Any help would be appreciated. An example. http://www.provantage.com/hewlett-packard-hp-455883-b21~4HPP93H7.htm
Tim
3 REPLIES 3
Ali
HPE Pro

Re: Virtual Connect FlexFabric 10Gb/24-Port Module

Hi There,

just out of curiosity... how exactly are you managing VC-FC modules... Are you using VCEM

user guides explains the configuratio part of it
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02048561/c02048561.pdf

thanks,
Aftab
I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base тАУ Just a Click Away!
See Self Help Post for more details

Accept or Kudo

TimInColdLake
Occasional Contributor

Re: Virtual Connect FlexFabric 10Gb/24-Port Module

Hi
We will be using VCEM. We are in the building and ordering stage right now. That is why the question.
Tim
ChrisTan_1
Advisor

Re: Virtual Connect FlexFabric 10Gb/24-Port Module

Hi,

you can use 455883-B21. It is an SFP+. The picture in the link is wrong.