Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect FlexFabric with CISCO Nexus

Go to solution
George Denyer_1
Frequent Advisor

Virtual Connect FlexFabric with CISCO Nexus



Does anybody have any experience to share about using FlexFabric with Nexus switches for SAN?  Is this supported?


This is how it would look like:




Any opinions are appreciated.






Hongjun Ma
Trusted Contributor

Re: Virtual Connect FlexFabric with CISCO Nexus

the short answer is that don't use Virtual connect to connect with Nexus5000/5500 for native FC connection. Nexus 8G implemenation is different than their MDS line. Nexus has not been certified as FC connection for VC.


FF is compatible with general MDS and Brocade switches. for the list of certified FC switch on VC-FC or FF, please check SPOCK database.  (Requires HP Passport sign-in)

My VC blog:

George Denyer_1
Frequent Advisor

Re: Virtual Connect FlexFabric with CISCO Nexus

Thank you Hongjun Ma for you answer, it was very useful.