BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect + LACP channels

 
SOLVED
Go to solution
PabloOttawa
Occasional Contributor

Virtual Connect + LACP channels

Hi all,
We have a c7000 enclosure with 4 ethernet interconnect bays, on bays 1,2,5 and 6. Let's ignore 5 and 6 for the time being.
From bay 1, I connect 4 ports to a Cisco switch and configure LACP; it works like a charm. However, if I move two of those ports from bay 1 to bay 2, then two links show as active and two on standby. If I make the active links fail, they fail over the standby links and fail back when recovering.

My question: Can I create a full active/active LACP trunk from different VC modules?

Thanks,

Pablo
2 REPLIES
HEM_2
Honored Contributor
Solution

Re: Virtual Connect + LACP channels

Pablo,

unfortunately, no. LACP channels can not span across multiple VC modules...
PabloOttawa
Occasional Contributor

Re: Virtual Connect + LACP channels

Thanks for confirming this.