HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect Manager


Virtual Connect Manager

Hi All,

This is my first time working with Blade Server. I have Blade C7000 Enclosure, with two Onboard Administrator Firmware version 1.30, and two HP 1/10Gb VC-Enet Module.

I logged on OA and trying to connect to the VC. According to the Virtual Connect User Guide, I can connect to Virtual Connect Manager via either within Onboard Administrator or DNS name with the Default Network Setting on the label.

But I couldn't access the Virtual Connect Manager via DNS Name, and within Onboard Administrator I don't see the Virtual Connect Manager link, which is according to the the User Guide, it should be below Insight Display.

I would really appreciate for help from the Blade Expert out there. Please see attached doc. for details.


Re: Virtual Connect Manager

Configured Interconnect Bays IP addresses.