BladeSystem - General
1748178 Members
4186 Online
108758 Solutions
New Discussion юеВ

Re: Virtual Connect Time 4 hours ahead of OA time

 
John Alston_1
Occasional Contributor

Virtual Connect Time 4 hours ahead of OA time

We just recently installed a C7000 enclosure and got our first two integrity blades. The time stamps in the system log in Virtual connect Manager are 4 hours ahead of the correct time. We made sure that the time setting in the OA is correct, but the system log entries are still 4 hours ahead. I couldn't find any way to set the time in the virtual connect manager. Does anybody have any ideas?
5 REPLIES 5
Raghuarch
Honored Contributor

Re: Virtual Connect Time 4 hours ahead of OA time

After setting the time did you try resetting the OA. It should work fine.
John Alston_1
Occasional Contributor

Re: Virtual Connect Time 4 hours ahead of OA time

Found the reset button. Problem resolved.

Thank you
Manuel_55
New Member

Re: Virtual Connect Time 4 hours ahead of OA time

Hi John,

I ran into this same issue with the VCM system log reporting Greenwich time and I reset the OA but nothing changed. Was there anything else you did besides reset the OA?

Thanks,
Manuel
John Alston_1
Occasional Contributor

Re: Virtual Connect Time 4 hours ahead of OA time

Resetting the OA resolved the problem.
Jon Ward
Trusted Contributor

Re: Virtual Connect Time 4 hours ahead of OA time

Do you mean you reset the OA to the factory defaults or just rebooted it?