BladeSystem - General
1748051 Members
4881 Online
108758 Solutions
New Discussion юеВ

Virtual Connect Update Path from F/W 2.34 to 3.18

 
cosonok
Occasional Advisor

Virtual Connect Update Path from F/W 2.34 to 3.18

Good day

Just want confirmation that the below is the correct path when upgrading virtual connect firmware.

1) Only do one virtual connect at a time
2) Do not skip more that two versions so:
a - first upgrade from 2.34 to 3.10
b - second upgrade from 3.10 to 3.18 (current latest)

Cheers!
3 REPLIES 3
The Brit
Honored Contributor

Re: Virtual Connect Update Path from F/W 2.34 to 3.18

Personally, I would use VCSU, and let the utility decide whether the upgrade path is OK. Also let VCSU do all modules in one pass, it is smart enought to know the correct order in which to do them.

Dave.
cosonok
Occasional Advisor

Re: Virtual Connect Update Path from F/W 2.34 to 3.18

Got it confirmed by HP twice. The entry in the question is a supported path.
cosonok
Occasional Advisor

Re: Virtual Connect Update Path from F/W 2.34 to 3.18

As stated in question.