HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect can not assign mac adress to BL460c with Windows 2003 x64

 
Sebian
Occasional Contributor

Virtual Connect can not assign mac adress to BL460c with Windows 2003 x64

Im facing a problem with the Virtual Connect. The embedded NIC's refuse to get the mac address that is assigned on the profile. Whereas the mezzanine NICs get the mac addresses assign to them just fine. Im using Windows 2003 Ent Edition x64 and the NIC's have the latest drivers and fw. So does the Virtual Connect v1.16

Thanks
2 REPLIES
HEM_2
Honored Contributor

Re: Virtual Connect can not assign mac adress to BL460c with Windows 2003 x64

what about System ROM version? There is a minimum version that supports virtualized MACs.

http://h18023.www1.hp.com/support/files/server/us/locate/1111_6231.html#1

Strange however that the mezz NICs get virtual but the embedded don't....

Happening on multiple servers or just one?

try powering off server, unassigning profile, re-assigning and powering back up.
Sebian
Occasional Contributor

Re: Virtual Connect can not assign mac adress to BL460c with Windows 2003 x64

Now the things are reversed.

The embedded nic get mac addresses and the mezzanine nc326m nics do not.

i have 3 BL460c servers and all of them have the same problem.

System BIOS, nic bios and drivers are the latest