HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual connect IP registers in DNS

 
petesbeat
Occasional Visitor

Virtual connect IP registers in DNS

I have a problem where the IP from the virtual connect keeps registering in DNS. The blade server has it's own IP (on the OS) but unless I force it to register the IP shows as the wrong one, even then it reverts after a few hours. Any ideas?
2 REPLIES
Adrian Clint
Honored Contributor

Re: Virtual connect IP registers in DNS

Pete, need a bit more info.
What are the names and the ip addresses?
Eg when you say the blade server has its own IP... do you mean ilO or OS?
Sounds like you have things with the same name on multiple IP address.
Pieter 't Hart
Honored Contributor

Re: Virtual connect IP registers in DNS

the "virtual connect", means though one physical link it shows op as different interfaces on the host?

windows tries to register all ip-adresses of all nic's in DNS.
queries to DNS then will "round robin" - cycle through all adresses.

you'll have to go into network settings and in DNS-tab uncheck "register in DNS" option.
for the virtual nic's
or assign other dns-domain namespace to this virtual nic's.