BladeSystem - General

Re: Virtual connect firmware upgrade via oneview

 
AndrewR2
Occasional Contributor

Virtual connect firmware upgrade via oneview

Afternoon all.

I am currently in the process of upgrading a virtuall connect enviroment in 1 single c7000 chassis. 

the vc's are HP VC Flex-10/10D Module and are managed by Oneview

They are currentlly on 4.50 and I would ike to check if You can upgrade directlly from 4.50 to 4.75? 

Thanks in advanced for the help.

Andrew

 

2 REPLIES 2
Anu_K
HPE Pro

Re: Virtual connect firmware upgrade via oneview

Hello Andrew,

I found this document which shows the upgrade path for VC modules: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00094030en_us Pg-8

Hope it helps!

 

Note: "While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company."

I am an HPE Employee

Accept or Kudo

ManBha
HPE Pro

Re: Virtual connect firmware upgrade via oneview

Hello,

 

Yes, we can update from VCM firmware 4.50 to 4.75.

 

Thanks.

I work for HPE

Accept or Kudo