HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual connect

 
SOLVED
Go to solution
toni osta
Frequent Advisor

Virtual connect

Hi ,

Please i need to know about this issue ,

can we connect external DL or ML servers to the VC switch in the c7000 enclosure , and could communicate with the external network and the blades

Thank you
2 REPLIES
Andrew_Read
Frequent Advisor
Solution

Re: Virtual connect

No,
Virtual conenct modules external connections can only be used as uplinks. External servers cannot be plugged directly into these ports.

Andrew
Raghuarch
Honored Contributor

Re: Virtual connect

can we connect external DL or ML servers to the VC switch in the c7000?

No. It won't work.

But if you connect the uplinks from the VC to same switch where the ML and DL are connected you will be able to access the Blades and ML and DL in the same Network.