BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

WS460c Workstation Blade and 64-bit issues

Clint Phillips
Occasional Advisor

WS460c Workstation Blade and 64-bit issues

Has anyone successfully deployed a 64-bit blade with a clean device manager? We're deploying RGS and these blades each have an nVidia 3600M Mezz card.

We successfully deployed XP 64-bit using the P410i,10Gb NIC, and ATI ES1000 drivers. When the build was complete we had 3 unknown devices in device manager.

Installed the iLO2 Managemant Controller driver which got rid of one of the unknown devices.

The next unknown device was resolved by installing Insight Management Agent For Windows Server (cp007555.exe) from _XW460_ driver page.

We figured the last device was the nVidia driver but this was not the case as it was listed as a Standard VGA Controller lacking a driver. The nVidia driver on the HP would not install so we had to grab a driver from nVidia.com.

The last device we still cannot get installed. We've tried every driver on WS460 driver page without success.

Base System Device
“PCI\VEN_0E11&DEV_B204&SUBSYS_3305103C&REV_03\4&2E6A429A&0&22F0”

Does anyone know what this is?

Has anyone been able to get the hp packaged nVidia driver installed?

1 REPLY
David Claypool
Honored Contributor

Re: WS460c Workstation Blade and 64-bit issues