What is default IRQ used by BL460 G1 integrated RAID controller?

[NJK-Work]

Hello,

We built all of our blade servers as boot-from-SAN and hence had disabled the integrated RAID controller on them (BL460 G1). However, now I would like to move back to local disks but don't know what IRQ to use when I re-enable it in the BIOS (there are like 5 to choose from).

Could someone let me know what the default value is, for a BL460 G1?

Thanks
Nelson

[Johan Guldmyr · Accepted solution]

We had a bl460c g1 in the lab :)

For the E200i controller the default IRQ is 10.
10 is also the IRQ as on the SC44GE we have installed, on 2 of the USB ports and 2 of the ilo devices.

Is the IRQ really that important these days?

[NJK-Work]

Thanks!

Nelson

[marcus1234]

just set bios to default..
and f10 and exit

[NJK-Work]

Thanks
Nelson

[NJK-Work]

I set the IRQ to 10, and it worked as expected.

Nelson

[Johan Guldmyr]

Cool :)