BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

What is default IRQ used by BL460 G1 integrated RAID controller?

 
SOLVED
Go to solution
NJK-Work
Honored Contributor

What is default IRQ used by BL460 G1 integrated RAID controller?

Hello,

We built all of our blade servers as boot-from-SAN and hence had disabled the integrated RAID controller on them (BL460 G1). However, now I would like to move back to local disks but don't know what IRQ to use when I re-enable it in the BIOS (there are like 5 to choose from).

Could someone let me know what the default value is, for a BL460 G1?

Thanks
Nelson
6 REPLIES
Johan Guldmyr
Honored Contributor
Solution

Re: What is default IRQ used by BL460 G1 integrated RAID controller?

We had a bl460c g1 in the lab :)

For the E200i controller the default IRQ is 10.
10 is also the IRQ as on the SC44GE we have installed, on 2 of the USB ports and 2 of the ilo devices.

Is the IRQ really that important these days?
NJK-Work
Honored Contributor

Re: What is default IRQ used by BL460 G1 integrated RAID controller?

Thanks!

Nelson
marcus1234
Honored Contributor

Re: What is default IRQ used by BL460 G1 integrated RAID controller?

just set bios to default..
and f10 and exit
NJK-Work
Honored Contributor

Re: What is default IRQ used by BL460 G1 integrated RAID controller?

Thanks
Nelson
NJK-Work
Honored Contributor

Re: What is default IRQ used by BL460 G1 integrated RAID controller?

I set the IRQ to 10, and it worked as expected.

Nelson
Johan Guldmyr
Honored Contributor

Re: What is default IRQ used by BL460 G1 integrated RAID controller?

Cool :)