HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

bl460c boot from san win2003

 
SOLVED
Go to solution
hturker
Frequent Advisor

bl460c boot from san win2003

i booted my unix redhat4 and redhat 5 from san
but in the same conditions i cant install win2003 why
it says itcant find hard disks
5 REPLIES
JKytsi
Honored Contributor
Solution

Re: bl460c boot from san win2003

Hi again,

You are installing via single path ?
Is You LUN configured for Windows in the EVA?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
hturker
Frequent Advisor

Re: bl460c boot from san win2003

yes me again,
everthing is same as i install unix
now i wanted to install win2003
http://download.qlogic.com/drivers/56772/Readme_BootfromSAN.htm
in this document it says press f6 and install driver but when i press f6 from the first screen i cant reach the add device

do you know how

and secondly must i show a driver in floopy?
hturker
Frequent Advisor

Re: bl460c boot from san win2003

now i come to add driver place
it says
please insert the disk labeled
manufacturer-supplieed hardware support disk into drive a
where can i find taht driver for floopy :(
hturker
Frequent Advisor

Re: bl460c boot from san win2003

HP uses other descriptions for HBA than Emulex and QLogic does. The QLogic 2462 is called FC1242.

I found this information here: http://h18007.www1.hp.com/products/quickspecs/12604_div/12604_div.HTML

You can download the driver for the FC1242 here:

http://h18006.www1.hp.com/products/storageworks/pciehbaql/index.html

regards
Patrick

its solved by patrick thanks
hturker
Frequent Advisor

Re: bl460c boot from san win2003

okey the solution is above