BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

bl460c not communicating through VCM

Romell_1
Occasional Advisor

bl460c not communicating through VCM

Hello -
-I have two VCM's
-I configured 4 seperate networks in the VCM
-4 bl460c
-The first/primary network is working and pinging
-The other three including one that has no ports assigned to it (for comm to stay internal to the chassis) cannot communicate.
-I have verified MAC addresses to make sure they are configured for the correct network.
-I can ping the local address but when I ping or do a trace route past the local blade the communication isn't going anywhere.

I'm stumped
He who walks through airport turnstile sideways is going to Bangkok
3 REPLIES
Adrian Clint
Honored Contributor

Re: bl460c not communicating through VCM

For the network that is internal to the chassis. You need to make sure Private Networks is unchecked.

Are you MAPing or Tunnelling VLANs at all?
If MAPing are you Forcing VLANS same as SUS uplinks?

Do you have your VLAN IDs set on your networks?, Do you have an untagged network set to be the primary network?
Romell_1
Occasional Advisor

Re: bl460c not communicating through VCM

The "Private Networks" is unchecked on the internal network.

I'm not MAPing or Tunnelling and I'm not using any Tagging.

Each network is a single dedicated network.
He who walks through airport turnstile sideways is going to Bangkok
WFHC-WI
Honored Contributor

Re: bl460c not communicating through VCM

Hi romell,

Do the server profiles show any error/warning/informational indicators on the Virtual Connect Manager page?