BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

blade removed/inserted

Gesmundo
Advisor

blade removed/inserted

We have these entries in the OA system log:

Sep  9 17:18:31  OA: Administrator logged into the Onboard Administrator from 10.224.67.25
Sep  9 17:19:44  OA: Administrator logged into the Onboard Administrator from 10.224.67.25
Sep  9 17:26:06  OA: Blade removed from bay 4
Sep  9 17:26:13  OA: Blade inserted in bay 4
Sep  9 17:26:13  OA: Blade in bay #4 status changed to OK
Sep  9 17:26:23  OA: Blade in bay 4 has been powered down
Sep  9 17:26:55  OA: Blade in bay #4 status changed to OK
Sep  9 17:26:55  OA: Blade 4 is now configured for Virtual Connect Manager.
Sep  9 17:27:43  OA: Administrator logged out of the Onboard Administrator
Sep  9 17:27:52  OA: Administrator logged out of the Onboard Administrator
Sep  9 17:44:59  OA: Blade in bay 4 has been powered on
Sep  9 17:44:59  OA: Blade 4 is properly cooled.
Sep  9 18:14:22  OA: svccmsmgmt logged into the Onboard Administrator from 10.13.11.83
Sep  9 18:14:23  OA: svccmsmgmt logged out of the Onboard Administrator

 

Do "blade removed" and "blade inserted" mean physical removal and insertion? Can one issue commands in OA/VC that will show the same entries in the log? I can see the removal and insertion within a minute followed by a logout.

 

Are there other events that triggered these entries?

 

Thank you.

 

Noel

1 REPLY
Torsten.
Acclaimed Contributor

Re: blade removed/inserted

Most likely the administrator did a reset server command from the OA command line.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!