BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c-class blade and Windows 2003x64

 
DonSmith0271
Occasional Advisor

c-class blade and Windows 2003x64

We have used RIS to push Windows 2003 X64 standard and Enterprise to our 685 and 460 blades. On all of the blades we are having network issues with the TCPIP settings. We are opening the settings, manually assigning IP address and changing some of the IP info for the server. We close the screen and then go back to it and it shows that DHCP is enable and all my settings aren't there. IP config shows that the settings have taken, but if you reboot, sometime the IP comes back as a 169 address. We have set up DHCP for some of the blades but we are using non-routable heartbeats on a few of the boxes and DHCP won't work for those. Any help would be appreciated..Thanks