BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c3000 and bl460 degraded

Mike Tupker
Advisor

c3000 and bl460 degraded

I just started getting a degraded status from one of our blade servers from the OA on the c3000 chassis. However I can't find anything that will tell me what is "degraded". Is there a way to find out or do I need to take the server offline and use the diagnostic CD. I would rather not have to take it offline since this is a VMware host running about 15 VMs.
3 REPLIES
Igor Karasik
Honored Contributor

Re: c3000 and bl460 degraded

Do you have any item not in "green" status when you enter into HP system management homepage on this server ?
WFHC-WI
Honored Contributor

Re: c3000 and bl460 degraded

I have seen this quite a few times when the iLO address for a blade server is unreachable or unresponsive. Make sure your iLO address configuration is correct and reboot the iLO processor if possible. This will not cause a downtime for the server itself.

Good luck!
Mike Tupker
Advisor

Re: c3000 and bl460 degraded

I ended up rebooting the iLO system like you suggested. the issue seems to have been resolved for now.